Basic Operations
PCVIDEO
VOL. |
MENUEXIT
OPERATE
PC VIDEO
W
ZOOM
| S |
| FREEZE |
VOLUME FOCUS | QUICK ALIGN. |
MENU | EXIT |
ENTER |
|
PRESET | HIDE |
“Vert. Keystone” Display
Vert. Keystone | 1 |
2
1Adjusted value range: - 100 ~ 0 ~100
2Level displayed
level displayed is based on the adjustment value.
“Horiz. Keystone” Display
Horiz. Keystone | 1 |
2
12
1Adjusted value range:
2Level displayed
level displayed is based on the adjustment value.
Removing the Trapezoidal Distortion of the Image
Depending on the angle of projection onto the screen, the image may get distorted in a trapezoid form sometimes.
When installing the projector or screen for the first time, or when rein- stalling in other rooms, etc., Keystone adjustments need to be made to remove trapezoid distortions.
Press V-KEYSTONE / to adjust in the vertical direction.
A “Vert. Keystone” display appears on the screen, and the projector goes into the KEYSTONE MODE.
Press button ( / ) in the direction that corrects the trapezoid form.
Projector: | Remote Control | Projector: | Remote Control | |
Control Panel | Unit |
| Control Panel | Unit |
Notes
•The range where the trapezoidal distortion can be rectified is 30˚ vertically and 10˚ horizontally with respect to the projector screen. However, when both are rendered together, the range of effective rectification will be narrower.
•Depending on the signal inputted, the keystone adjustment range may narrow or parts of the image may disappear. This is not a mal- function.
•Interference patterns may appear on the screen when adjusting the keystone. This is not a malfunction.
•To restore the original set value, press the PRESET button. (Adjusted value: 0)
Press H-KEYSTONE 
/ 
to adjust in the horizontal direction.
A “Horiz. Keystone” display appears on the screen, and the projector goes into the KEYSTONE MODE.
Press button (
/ 
) in the direction that corrects the trapezoid form.
Projector: | Remote Control | Projector: | Remote Control |
Control Panel | Unit | Control Panel | Unit |
30
