Power ON/OFF (continued)
Turning Off The Power
NOTE • Turn the power on/off in right order. Please power on the projector before the connected devices. Power off the projector after the connected devices.
1 Press the STANDBY/ON button of the projector or the ![Switch the power switch to [O] (OFF).](/images/new-backgrounds/119526/11952635xi2.webp){kind=small}
button of the remote control.
The message “Power off?” will appear on the screen for approximately 5 seconds.
2 Press the STANDBY/ON button again while “Power off?” the message is visible.
The projector lamp will go off, and the POWER indicator will begin blinking orange.
Then the POWER indicator will stop blinking and light to solid orange when the lamp cooling is complete.
3 | Switch the power switch to [O] (OFF). |
| Power switch (OFF position) |
| The POWER indicator will go off. |
4 | Attached the lens cap. |
POWER indicator
TEMP
POWERLAMP
STANDBY/ON INPUT | MENU |
STANDBY/ON button
Power switch
(STANDBY/ON) button
VIDEO RGB | SEARCH |
|
ASPECT | AUTO | BLANK |
MAGNIFY | PAGE UP | VOLUME |
HOME |
ON
16
