Dukane 8055 PICTURE - 2 Menu, Multifunctional Settings continued, Adjust the Vertical Position

Multifunctional Settings (continued)

PICTURE - 2 Menu

With the PICTURE - 2 menu, the items shown in the table below can be performed.

Perform each operation in accordance with the instructions in the table below.

MENU

MAIN	V POSITION	20
PICTURE-1	H POSITION	142
PICTURE-2	H PHASE	31
INPUT	H SIZE	1344
AUTO	OVER SCAN	95
SCREEN	RESET
OPTION

: SELECT

Item		Description
V POSITION	Adjust the Vertical Position:	Up	⇔	Down
	• This item can be selected only at a RGB input.
H POSITION	Adjust the Horizontal Position: Left		⇔	Right
	• This item can be selected only at a RGB input.

Adjust the Horizontal Phase (to eliminate flicker) :

H PHASE	Right	⇔	Left
	• This item can be selected only at a RGB input or a COMPONENT VIDEO
	input.
	Adjust the Horizontal Size: Large			⇔	Small
	• When this adjustment is excessive, the picture may not be displayed
H SIZE	correctly. In such a case, please press the RESET button during selection of
	this item to reset the H SIZE.
	• This item can be selected only at a RGB input.

Adjust the Over-scan Ratio:

Large ⇔ Small

• This item can be selected only at a VIDEO input, a S-VIDEO input or a

OVER SCAN

COMPONENT VIDEO input.

•When this adjustment is too large, a certain degradation may appear at the frame area of the picture. In such a case, please adjust small.

	Reset the PICTURE-2 Menu Items:
	Selecting the EXECUTE performs this function.
RESET	EXECUTE	⇒ CANCEL
	• The items of the PICTURE-2 menu are collectively returned to the initial
	setting. Note that the H PHASE item is not reset.

26