Operating
Operating
Adjusting the volume
1. | Press the VOLUME button on the remote control. | MAGNIFY | VOLUME |
A dialog will appear on the screen to aid you in adjusting | ON |
| |
| FREEZE MUTE | ||
the volume. | OFF | KEYSTONE ONE TOUCH | |
|
|
| |
2. Use the cursor buttons ▲/▼ to adjust the volume.
To close the dialog and complete the operation, press the VOLUME button again. Even if you don’t do anything, the dialog will automatically disappear after a few seconds.
Temporarily muting the sound
1. Press the MUTE button on the remote control.
A dialog will appear on the screen indicating that you have muted the sound.
POSITION |
|
MAGNIFY | VOLUME |
ON |
|
FREEZE | MUTE |
OFF |
|
KEYSTONE ONE TOUCH
To restore the sound, press the MUTE or VOLUME button.
Even if you don’t do anything, the dialog will automatically disappear after a few seconds.
Selecting an input signal
1. Press the INPUT button on the projector.
Each time you press the button, the projector switches its input port as below.
RGB IN1 RGB IN2 DVI-D VIDEO S-VIDEO COMPONENT VIDEO
1. Press the RGB button on the remote control to select an input port for RGB signal.
Each time you press the button, the projector switches its RGB input port as below.
RGB IN1 RGB IN2 DVI-D
NDBY/ON
INPUT
KEYSTONE
RESET
LASER
INDICATOR
STANDBY/ON VIDEO RGB
UP
PAGE
●When the TURN ON is selected to the item AUTO SEARCH of OPTION menu (38), the projector checks the current selected port at first. If no input is detected at the port, projector will check other ports in above order.
1. Press the VIDEO button on the remote control to select an input for video signal.
Each time you press the button, the projector switches its video input port as below.
COMPONENT VIDEO S-VIDEO VIDEO
LASER
INDICATOR
STANDBY/ON VIDEO RGB
UP
PAGE
●When the TURN ON is selected to the item AUTO SEARCH of OPTION menu (38), the projector checks the current selected video port at first. If no input is detected at the port, projector will begin to check other ports in above order.17
