Multifunctional settings
NETWORK Menu
With the NETWORK menu, items shown in the table below can be performed.
Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.
Make your Network settings by manual operation as following the dialog box.
MENU [RGB] |
| :SELECT |
PICTURE | DHCP | TURN OFF |
IMAGE | IP ADDRESS |
|
VIDEO Qlty. SUBNET MASK |
| |
INPUT | DEFAULT GATEWAY | |
SETUP | INFORMATION |
|
SCREEN |
|
|
OPTION |
|
|
NETWORK |
|
|
EASY MENU |
|
|
Item | Description |
|
|
| |
| Using the buttons ▲/▼ turns on/off the DHCP function. |
|
| ||
DHCP | TURN ON TURN OFF |
|
|
| |
If your network doesn’t support the DHCP function, select the TURN | |||||
| |||||
| OFF. |
|
|
| |
| Enter the IP address of the projector using |
|
|
| |
IP ADDRESS | the ◄/►/▲/▼ buttons. | 192. 168. | 1. | 24 | |
This menu is available only when the item of | IP ADDRESS | ||||
|
|
|
| ||
| the DHCP is set to TURN OFF. |
|
|
| |
| Enter the SUBNET MASK of your |
|
|
| |
SUBNET MASK | NETWORK using the ◄/►/▲/▼ buttons. | 255. 255. 255. | 1 | ||
This menu is available only when the item of | SUBNET MASK | ||||
| |||||
| the DHCP is set to TURN OFF. |
|
|
| |
| Enter the DEFAULT GATEWAY. This is the |
|
|
| |
DEFAULT | address of the device as gateway to an | 255. 255. 255. | 0 | ||
outer network. |
|
|
| ||
GATEWAY | DEFAULT GATEWAY | ||||
This menu is available only when the item of | |||||
|
|
|
| ||
| the DHCP is set to TURN OFF. |
|
|
| |
INFORMATION | Selecting this item shows the information about the current network | ||||
setting of the projector. |
|
|
| ||
|
|
|
| ||
40
