Multifunctional settings
VIDEO Qlty. Menu
With the VIDEO Qlty. menu, items shown in the table below can be performed.
Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.
MENU [RGB] | :SELECT |
PICTURE | PROGRESSIVE TURN OFF |
IMAGE | 3D‑YCS TURN OFF |
VIDEO Qlty. VIDEO NR LOW | |
INPUT |
|
SETUP |
|
SCREEN |
|
OPTION |
|
NETWORK |
|
EASY MENU |
|
Item
Description
| Using the buttons ▲/▼ switches the progressive mode. | |
| TV FILM TURN OFF | |
| • This function performs only at an interlaced signal of a VIDEO | |
| input, a | |
PROGRESSIVE | (480i) or 625i (576i) signal. | |
• When the TV or FILM is selected, the screen image will be crisper. | ||
| ||
| The FILM mode is adaptable to the | |
| conversion. But these may cause a certain defect (for example, | |
| jagged line) of the picture at a quick moving object. In such a case, | |
| please select the TURN OFF, even though the screen image may | |
| lose the crisp. | |
| Using the buttons ▲/▼ switches the | |
| STILL IMAGE NORMAL TURN OFF | |
| • This function performs only at a VIDEO input of NTSC 3.58. | |
• NORMAL is the mode for images with a lot of motions like movies, | ||
| and STILL IMAGE is the mode for images with few motions or | |
| completely still ones like slides. | |
| • When this function performs, the VIDEO NR function is ineffective. | |
| Using the buttons ▲/▼ switches the noise reduction mode. | |
| HIGH MIDDLE LOW | |
| • This function performs only at a VIDEO input or a | |
VIDEO NR | At a VIDEO input of NTSC 3.58, this function performs only when | |
the TURN OFF is selected under the | ||
| ||
| • When the HIGH, the MIDDLE or the LOW is selected, the noise | |
| on screen is reduced according to each mode. | |
| • When this function is excessive, it may cause a certain | |
| degradation of the picture. |
31
