RaceAmerica Model 3220 Timer SBD
MAINTENANCE | WIN LIGHT ASSEMBLY |
The 3220 Series Console, Beam Emitter, and Track Sensors do not require any maintenance.
To insure uninterrupted operation on raceday, it is suggested to keep track of battery usage hours so as to have fully charged batteries. Plan to re- place the ‘C’ cells in the Beam Emitter after about 200 hours use. If you are using rechargeable ‘C’ cells, recharge them each day. Low battery volt- age (Emitter voltage below 4.3VDC) will cause intermittent operation of the system resulting in intermittent events at the finish line as the battery power weakens.
To maintain the highest level of timing accuracy and minimize false trips, annual pre- ventative maintenance and calibration should be performed on all system track sensors and beam emitter units.
SPARE PARTS
Further to minimize race program inter- ruptions, RaceAmerica recommends some spare parts. A spare emitter/sensor pair and end of track cable sections should be available in the event of an unfortunate accident during a program. Con- tact RaceAmerica for availability and pricing of spares items.
SUPPORT AGREEMENTS
Support agreements are available from RaceAmerica providing Telephone Assistance on technical issues and operational questions, repair and/or replacement of hardware failures, Software and Firmware updates and bug reporting, and Annual Preventative Maintenance on all system track sensors and beam emitter units. Contact RaceAmerica for more information and pricing of Support Agreements.
The win lights are assembled by screwing the post into the base and then attaching the Win Light with a
10
