Guideposts
Remove cardboard insert
Click!
Inserting the Tape Cassette
Your label maker comes with one tape cassette. Visit www.dymo.com for information about purchasing additional tape cassettes.
To insert the tape cassette
1.Lift the tape cassette cover to open the tape compartment. See Figure 3.
ÇBefore using the label maker for the first time, remove the protective cardboard insert from the tape exit
slot. See Figure 4.
2. Insert the cassette with the label facing up and positioned between the guideposts.
3.Press firmly until cassette clicks into place. See Figure 5.
4.Close the tape cassette cover.
Using the Label Maker for the First Time
The first time you turn on the power, you are asked to select the language. This selection will remain set until you change it, or until the label maker is reset. You can change this selection
using the 
key.
Figure 3
Figure 4
Click!
Figure 5
7
