Dymo 31-250 Additional Safety Rules For Drum Sanders, Hold the Work Firmly when sanding

ADDITIONAL SAFETY RULES

FOR DRUM SANDERS

FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS PERSONAL INJURY.

1.DO NOT OPERATE THIS TOOL UNTIL it is assembled and installed according to the instructions.

2.OBTAIN ADVICE from your supervisor, instructor, or another qualified person if you are not familiar with the operation of this tool.

3.FOLLOW ALL WIRING CODES and recommended electrical connections.

4.COVER POWER TAKE-OFF SHAFT when not using accessories. Unguarded rotating shafts can create an entanglement hazard which can result in injury.

5. USE A DUST COLLECTION SYSTEM with this tool.

6.CAUTION: THIS MACHINE IS DESIGNED TO SAND WOOD or wood-like products only. Sanding or grinding metal could result in fire, injury, and/or damage to the product.

7.CHECK THE TABLE BELT TRACKING to prevent belt run-off.

8.CHECK BELTS FOR WEAR and for tension.

9.CLEAR THE SANDING AREA and infeed/ outfeed tables of all objects (tools, scrap pieces, etc.) prior to starting tool.

10.DO NOT sand pieces of material that are shorter than 7" in length or thinner than 1/32".

11.SUPPORT ALL SANDING WORKPIECES with a table or additional support at table height. Curved work on an outer sanding drum is the only exception.

12.DRESS PROPERLY. DO NOT WEAR LOOSE CLOTHING OR JEWELRY. CONTAIN LONG HAIR. KEEP YOUR HAIR, CLOTHING, AND GLOVES AWAY FROM MOVING PARTS. Loose clothes, jewelry, or long hair can be caught in moving parts.

13.PREVENT THE WORKPIECE FROM CONTACTING THE SANDING BELT before starting the tool.

14.AVOID AWKWARD HAND POSITIONS. A sudden slip could cause a hand to contact the sanding belt.

15.NEVER WEAR GLOVES or hold the work with a rag when sanding.

16.HOLD THE WORK FIRMLY when sanding.

17.SAND with the grain of the wood

18.FEED WORK against the drum rotation.

19.NEVER perform layout, assembly, or set-up work on the tables when the tool is operating.

20.DISCONNECT THE TOOL from the power source before installing or removing accessories, before adjusting or changing set-ups, or when making repairs.

21.DISCONNECT THE TOOL from the power source, and clean the table/work area before leaving the tool. LOCK THE SWITCH IN THE “OFF” POSITION to prevent unauthorized use.

22.ADDITIONAL INFORMATION regarding the safe and proper operation of power tools (i.e. a safety video) is available from the Power Tool Institute, 1300 Sumner Avenue, Cleveland, OH 44115-2851 (www.powertoolinstitute.com). Information is also available from the National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201. Please refer to the American National Standards Institute ANSI 01.1 Safety Requirements for Woodworking Machines and the U.S. Department of Labor OSHA 1910.213 Regulations.

SAVE THESE INSTRUCTIONS.

Refer to them often and use them to instruct others.

4