A list of ten fields, which represent memory locations, are displayed. Fields that contain formats display a name in the field. You can store new formats in any of the fields, however, if you select a location that is filled, the previous label format will be overwritten.
3.Select a field and press OK. The word NAME? appears in the field.
4.Enter a name for the format and press OK. Your label format is saved and you are returned to the label.
Recalling Stored Labels and Formats
You can easily recall labels and formats stored in memory to use at a later time.
To recall labels or formats
1.Press Memory.
2.Select Recall and then LABEL, FORMAT, or LAST PRINTED.
A list of memory locations is displayed similar to storing a label or format.
3.Select a label or format to recall and press OK.
Caring for Your Labelmaker
Your labelmaker is designed to give you long and
Clean your labelmaker from time to time to keep it working properly. Clean the cutter blade each time you replace the tape cassette.
To clean the cutter blade
1.Remove the tape cassette.
2.Press and hold down the cutter lever to expose the cutter blade.
3.Use a cotton ball and alcohol to clean both sides of the blade.
4. Release the cutter lever.
You can also follow this procedure if the cutter blade becomes lodged in the forward position and will not move.
To clean the print head
♦Clean the print head using the cleaning tool located inside the tape compartment lid.
11
