LP Gas Grill
ASSEMBLY INSTRUCTIONS
Step 1
1.Secure each locking caster (2) to the back side (side that is beveled for access to locking mechanism when assembled and upright) of the bottom shelf (1) using four screws (A) four spring washers (F) ) and four flat washers (G). Then tighten all screws.
2.Install the casters (3) to the front side
(not beveled) of bottom shelf using four screws (A) four spring washers (F) ) and four flat washers (G). Then tighten all screws.
3 2
1
Back Side Beveled 
Hardware Used
A | M6x12 | 16 pc | F |
| |||
Scr ew |
| ||
F | 6MM | 16 pc |
|
Spring Washer |
| ||
G | 6MM | 16 pc | G |
Flat Washer |
A
Step 2
First, remove the pins (7) from the cylinder holder (6). Insert the cylinder holder (6) through the holes in the bracket
Parts Used
6 | Cylinder | 1 pc |
Holder | ||
7 | Pin | 2 pc |
5
6
7
9
