LP Gas Grill
ASSEMBLY INSTRUCTIONS
Step 12
Install the collapsible shelf support A (14) and collapsible shelf support B
(15)on both sides of the grill body using hardware part E (M5x12 screw).
14 | 15 | 12 |
Hardware Used
E | M5x12 | 16 pc |
Scr ew |
A 14 | B 15 |
Collapsible
Shelf Support
E
Step 13
WARNING: IT IS VERY IMPORTANT TO CHECK AND
ENSURE THAT EACH AND EVERY BURNER IS FULLY ENGAGED WITH THE ADjACENT VALVE ORIFICE BEFORE COMPLETING STEP 13. FAILURE TO DO SO MAY RESULT IN FIRE OR ExPLOSION, POSSIBLY CAUSING SERIOUS INjURY OR DEATH. REFER TO MAINTENANCE SECTION INSTRUCTIONS TO PROPERLY CHECK THE ENGAGEMENT.
16
Open the lid and place the two heat tents (16) on the brackets directly above the burners on the inside the grill body.
15
