LP Gas Grill
OPERATION INSTRUCTIONS
LIGHTING THE GRILL WITH A MATCH
Warning: Do not lean over grill when lighting.
Read instructions before lighting.
1.Insert a match in the end of the match holder that is installed on the inside of the cabinet door.
2.Light the match.
3.Immediately place the lit match through the 20mm hole on the side of the grill body, nearest the burner you want to light. Make sure the lit match is close to the burner ports.
4.Press in the control knob that operates that burner and rotate
counterclockwise 
to High 
position and burner should light immediately.
5.Adjust burners to desired cooking settings.
If lighting both burners is required, repeat steps 1 through 4 to light the other burner.
SHUTDOWN INSTRUCTIONS
1.Turn control knobs clockwise 
to the off position. 
2.Close valve at tank fully by turning clockwise. 
3.Close lid.
Turn off LP supply at cylinder when appliance is not in use.
25
