LP Gas Grill
ASSEMBLY INSTRUCTIONS
Step 5 | 4 | 8 | 5 |
1.Align the key holes in the cart rear panel (8) with the 4 screws just installed into the cart left and right side panels. Push cart rear panel
(8) onto screws and down to meet bottom shelf (1).
2.Secure the cart rear panel (8) to the bottom shelf (1) with two screws (A). Next, tighten the 4 screws on the cart left and right side panels (4 and 5).
Hardware Used
A
1
Tighten 
Screw (A).
A | M6x12 | 2 pc |
Scr ew |
Step 6
| 5 |
|
Secure the upper door brace (9) |
|
|
to the cart left and right side panels |
|
|
using four screws (A), and then | A |
|
tighten the screws. | 9 | |
|
|
|
4
Hardware Used
A | M6x12 | 4 pc |
Scr ew |
11
