Dynacord 1000 REAR PANEL

The PowerMate is equipped with professional SPEAKON

connectors, offering an electrical and mechanical secure con-

nection which complies to all security regulations. It also allows

the use of high quality speaker cables with a diameter of 4 x

2.5mm2. The DYNACORD accessory assortment includes all

recommended cables and connectors.

WARNING:

The speaker output terminals are marked with a

symbol “ ”, which signifies that these terminals

present a shock hazard to the user.

Make connections to these terminals as described in the

owner’s manual.

mains switch to turn the PowerMate on or off.

The PowerMate is operational when the POWER ON indicator

is lit and the power outputs are activated.

Please make sure to set the master faders to their minimal

position or engage the STANDBY switch before turning

the power on. This will save you, your audience, and the

equipment from unnecessary stress.

In case additional external equipment is connected to the

PowerMate – e. g. FX units, power amplifiers, EQs, etc. –

please, proceed in the following order when switching

your equipment on:

1.FX units

2.PowerMate

3.external power amplifiers

When switching the power off, please proceed in the

opposite order.

REAR PANEL