DIGITAL SYSTEM AMPLIFIER
1 Introduction
Dynacord‘s new high efficiency DIGITAL SYSTEM AMPLIFIER series combine uncompromising audio performance with the highest reliabilty.
1.1 Unpacking and Inspection
Carefully open the packaging and take out the power amplifier. Inspect the power amp’s enclosure for damages that might have occured during transportation. Each amplifier is examined and tested in detail before leaving the manufacturing site to ensure that it arrives in perfect condition at your place. Please inform the transport company immediately if the power amplifier shows any damage. Being the addressee, you are the only person who can claim damages in transit. Keep the cardboard box and all packaging materials for inspection by the transport company.
Keeping the cardboard box including all packing materials is also recommended, if the power amplifier shows no external damages.
CAUTION:
Do not ship the power amp in any other than its original packaging.
When shipping the power amp, make sure to always use its original box and packaging materials. Packing the power amplifier like it was packed by the manufacturer guarantees optimum protection from transport damage.
1.2 Scope of Delivery and Warranty
•1 Power Amplifier
•1 Owner‘s Manual (this document)
•1 Mains Cord
•1 (DSA 8405/8410) or 2 (DSA 8805) Output connectors, 8 pole
•2 (DSA 8405/8410) or 4 (DSA 8805) Input connectors, 6 pole
•1 Power Remote connector, 2 pole
•1 Warranty Certificate with safety instructions
Keep the original invoice that states the purchase/delivery date together with the warranty certificate at a safe place.
1.3 Responsibility of the User
Speaker System Damage
DSA power amps provide extremely high power output that might be dangerous for human beings as well as for the connected speaker systems. High output voltages can damage or even destroy the connected speaker systems, especially, when the DSA amplifier is operated in bridged mode. Prior to connecting any loudspeakers, make sure to check the speaker system’s specifications for continuous and peak power handling capacities. Even if amplification has been reduced through lowering the input level controls on the amplifier’s front panel, it is still possible to achieve full power output with a sufficiently high input signal.
Danger at the Loudspeaker/Power Outputs
DSA amplifiers are capable of producing dangerously high voltage output that is present at the output connectors. To protect yourself from electric shock, do not touch any blank speaker cables during operation of the power amp.
WARNING:
The terminals marked with 
are hazardous live and the external wiring connected to these terminals requires installation by an instructed person or the use of
HF-Interference (FCC Information USA)
1.IMPORTANT: Do not modify this unit! Changes or modifications not expressly approved by the manufacturer could void the user‘s authority, granted by the FCC, to operate the equipment.
2.NOTE:This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection agains harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
