Dynacord ENTERTAINMENT SYSTEM, MP7 Rear Panel, Speaker Outputs Right / Left, Power, Phono Ground

REAR PANEL

SPEAKER OUTPUTS RIGHT / LEFT

The MP7 provides professional SPEAKON-type high-perfor- mance connectors, which offer mechanically and electric secu- re connection that complies with any safety standards. Additionally, SPEAKON-type connectors allow utilizing high- performance loudspeaker cables with diameters of up to 4 x 2.5mm2.

Single plugs and jacks as well as high-performance speaker cables are available from the DYNACORD accessory assort- ment.

POWER

Mains switch for switching the MP7’s power ON or OFF. The appliance is operational when the POWER ON-LED lights and the power relays have switched the power amplifier output signal to the speaker outputs.

Before switching the mixer’s power on, make sure to set the master faders to their minimum position. This will save yourself, your audience, and your equipment from unne- cessary stress resulting from switching or feedback noi- se.

When switching your audio system on with additional power amplifiers or other electronic equipment, like for example CD-Players, MD-Recorders, etc. connected, please proceed in the following sequence:

1.switch the CD-Player’s power on

2.switch the MP7’s power on

3.switch the additionally connected gear (power amps) on

Please proceed in the opposite sequence when switching the audio system off.

PHONO GROUND

Facility for connecting the chassis ground of a turntable. Make sure to connect the chassis ground to the PHONO GROUND screw. Otherwise you might be facing hum and interference noise.

39