Dynacord Professional Power Amplifiers manual General

CL Series

CL 1600

General			CL 1600						CL 2000
Load Impedance	2 Ω		4 Ω		8 Ω		2 Ω		4 Ω	8 Ω
Maximum Midband Output Power, 1 kHz, THD=1%	1100 W		800 W		500 W		1500 W		1000 W	600 W
Rated Output Power, 20 Hz ... 20 kHz, THD <0.1%	-		700 W		350 W		-		850 W	450 W
Max. Single Channel Output Power	2200 W		1200 W		625 W		2700 W		1450 W	750 W
Dynamic-Headroom, IHF-A
Max. Single Channel Output Power Continuous, 1kHz	1500 W		950 W		550 W		1900 W		1150 W	650 W
Maximum Bridged Output Power 1 kHz, THD=1%	-		2200 W		1600 W		-		3000 W	2000 W
Maximum RMS Voltage Swing 1 kHz, THD=1%			72 V						80 V
Power Bandwidth, THD=1%, ref. 1kHz, half power @ 4Ω					10 Hz ... 60 kHz
Voltage Gain ref. 1 kHz						32 dB
Input Sensitivity at rated output power @ 8Ω, 1 kHz		+4.7 dBu (1.33 V rms)						+5.5 dBu (1.46 V rms)
THD at rated output power MBW=80kHz, 1 kHz					< 0.05 %
IMD-SMPTE,60 Hz, 7 kHz					< 0.02 %
DIM 30, 3.15 kHz, 15 kHz					< 0.01 %
Max. Input Level					+22 dBu (9.76 Vrms)
Crosstalk, ref. 1 kHz at rated output power					< -80 dB
Frequency Response, ref. 1 kHz					15 Hz ... 40 kHz (- 1dB)
Input Inpedance, active balanced						20 kΩ
Damping Factor, 1kHz						> 300
Slew Rate			35 V/µs						35 V/µs
Signal to Noise Ratio, A-weighted			107 dB						109 dB
Output Stage Topology						Class-H
Power Requirements		100 V, 120V, 220V, 230V, 240V, 50 Hz... 60 Hz (factory configured)
Power Consumption at 1/8 maximum output power @ 4 Ω			660 W						725 W
Protections	Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters,
					Turn-on Delay
Cooling					Front-to-Rear, 3-stage-fans
Ambient Temperature Limits				+5°C ... +40°C (40°F ... 105°F)
Safety Class							I
Dimensions (WxHxD), mm					483 x 88.1 x 386.8
Weight		16 kg (35.3 lbs)							18.2 kg (39.7 lbs)
Optional Accesories:
Rear Rackmount 15.5“: D112 930 (NRS90262)
Rear Rackmount 18.0“: D112 933 (NRS90264)
LPN + Lo-Cut Filter: D112963 (NRS 90268)

59