Dynacord Professional Power Amplifiers manual General, Load Impedance

DSA Series - Multi-Channel

DSA 8805

General					DSA 8410
Load Impedance	2 Ω		4 Ω		8 Ω	70 V /	100 V /
						5Ω	10Ω
Maximum Midband Output Power, 1 kHz, THD=1%, 4 channels	1000 W		1000 W		500 W	1000 W	1000 W
driven					VLD:1000 W
Rated Output Power, 20 Hz ... 20 kHz, THD <0.3%, 4 channels	900 W		900 W		450 W	900 W	900 W
driven					VLD:900 W
Maximum Bridged Output Power	-		2000 W		2000 W	2000 W / 10 Ω	2000 W /20 Ω
1 kHz, THD=1%
Maximum RMS Voltage Swing	45 V			63 V		70 V	100 V
1 kHz, THD=1%
Input Sensitivity, rated power, 1 kHz	1.1 V			1.55 V		1.55 V
	(+3.0 dBu)		(+6.0 dBu)			(+6.0 dBu)
Power Bandwidth, THD=1%, ref. 1kHz, half power @ rated load		10 Hz ... 25 kHz				50 Hz ... 25 kHz
Voltage Gain ref. 1 kHz			32 dB			33 dB	36 dB
THD at rated output power				< 0.05 %
MBW=80kHz, 1 kHz
IMD-SMPTE,60 Hz, 7 kHz				< 0.05 %
DIM 30, 3.15 kHz, 15 kHz				< 0.02 %
Max. Input Level				+22 dBu (9.76 Vrms)
Crosstalk, ref. 1 kHz at rated output power					< -80 dB
Frequency Response, ref. 1 kHz, 8 Ω load				15 Hz ... 30 kHz (± 1dB)
Input Inpedance, active balanced					20 kΩ
Damping Factor, 1kHz, 8 Ω				> 240
Slew Rate					28 V/µs
Signal to Noise Ratio, A-weighted	101 dB			103 dB		104 dB	106 dB
Output Noise, A-weighted	< -66 dBu		< -65 dBu			< -65 dBu	< -64 dBu
Output Stage Topology					Class-D
Power Requirements		220-240V, 50-60 Hz or 120 V, 50-60 Hz or 100 V, 50-60 Hz
Power Consumption					840 W
at 1/8 maximum output
Protections	Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Inrush Current
	Limiters, Turn-on Delay, Mains Circuit Breaker Protection, Mains Over/Undervoltage Protection
Cooling			Front-to-Rear, temperature controlled fans
Ambient Temperature Limits			+5 °C...+40 °C (40 °F...105 °F)
Safety Class					I
Dimensions (WxHxD), mm					481 x 88.0 x 421
Weight					11.1 kg (24.3 lbs)

63