DX Switchbox
7.2Maintenance
1.All vehicle components should be regularly checked for loose, damaged or corroded connectors, terminals, or cabling. All cables should be restrained to protect them from damage. Damaged components should be replaced.
2.All switchable functions on the Dynamic electronics system should be regularly tested to ensure they function correctly.
3.All Dynamic electronic components should be kept free of dust, dirt and liquids. If necessary, wipe with a cloth dampened with warm water or alcohol. Do not use solvents or abrasive cleaners.
4.There are no
5.Where any doubt exists, consult your nearest service center or agent.
Warning:
If any component is damaged in any way, or if internal damage may have occurred (for example by being dropped), have it checked by qualified personnel before operating.
7.3Warranty
All equipment supplied by Dynamic Controls is warranted by the company to be
free from faulty materials or workmanship. If any defect is found within the warranty
period, the company will repair the equipment, or at its discretion, replace the
equipment without charge for materials and labour.
This Warranty is subject to the provisions that the equipment:
•has been correctly installed.
•has been thoroughly checked upon completion of installation, and all programmable options correctly adjusted for safe operation prior to use.
•has been used solely in accordance with this manual.
•has been used solely for the driving of electrically powered wheelchairs in accordance with the wheelchair manufacturer's recommendations.
•has been properly connected to a suitable power supply in accordance with this manual.
•has not been subjected to misuse or accident, or been modified or repaired by any personnel other than those authorized by Dynamic Controls.
9
