Dynamic Distributors DX-ARC-SWB installation manual Programming

DX Switchbox (DX-ARC-SWB) – Installation Manual

3 Programming

For the DX-ARC-SWB to function correctly, the ARC Enable setting must be set to Yes, and the Joystick Actuators setting set to No (depending on the Master Remote used), using the Wizard programmer.

Most DX Master Remotes will allow only one Actuator control, the DX-

ARC-SWB or the Master Remote, but not both.

Set any other parameters as required to achieve the desired drive performance and operation for the other DX Modules. Further details about programming can be found in the manuals of the DX Modules concerned.

3