Dynamic Distributors DX-ARC-SWB Physical Specifications, Parameter, Nominal, Units

Models: DX-ARC-SWB

1 14

Page 11

DX Switchbox (DX-ARC-SWB) – Installation Manual

Material	Aluminium alloy

Finish	Epoxy powder-coated “Rolling Thunder”

Protection Rating	Not rated

Physical Size:	95mm x 61mm x 26mm

Shipping Weight	100g

		Min	Nominal	Max	Units

Operating Temperature Range		-25		50	°C

Storage Temperature Range		-40		65	°C

Operating Humidity Range		10		90	%RH

Image 11

Contents

DX Switchbox DX-ARC-SWB Installation Manual Warnings About this ManualConnections and Wiring ContentsMounting and Installation Introducing the DX SwitchboxGBK62297 Issue 1, February 1 Introducing the DX Switchbox 2 Mounting and Installation ARC-SWB or the Master Remote, but not both 3 ProgrammingMost DX Master Remotes will allow only one Actuator control, the DX 4.1 DXBUS 4 Connections and WiringEnsure that all wiring is suitably restrained to prevent snagging 1 Place the battery circuit breaker in the open positionUse appropriate quality assemblies for the installation of the system 4.2 Seat Switches4.3 Switched Auxiliary Power Supply Output There must be a link between Pins 1 and 8 for the unit to operate6.1 Electrical Specifications 5 Testing the Installation6 Specifications Units 6.2 Physical SpecificationsParameter NominalCompliance and Conformance with Standards 7 Appendix7.1 Intended Use Statement Device Classification7.3 Warranty 7.2 Maintenance7.5 Contact Details 7.4 Safety and Misuse Warnings