T r o u b l e S h o o t i n g G u i d e
No heat or heat too low
Probable Cause #1
Action
Probable Cause #2
Action
Probable Cause #3
Action
Probable Cause #4
Action
Dirty Filter
Clean Filter / Pull Filter and try running without filter
Breaker at house off.
Reset breaker at house. Breaker can appear to be on and one pole can be off. Turn breaker OFF then ON twice.
Pump not primed.
Refer to the section of this manual on pump priming
Improper line voltage.
Have a Licensed Electrician check the line voltage.
Spa Lights won't come on
Probable Cause #1 Action
Probable Cause #2 Action
Light bulb burnt out.
Replace bulb.
Dirty connection
Check to see if there is anything covering the con- nection on the housing that holds the light bulb.
Pump will not prime
Probable Cause #1
Action
Probable Cause #2
Action
Probable Cause #3
Action
Probable Cause #4
Action
No water in pump
Make sure water level in spa is correct. Bleed top air bleed on face of pump till water flows out.
Closed gate valves or blocked lines.
Open all gate valves. Check suction for blockage
Pump surges, jets lose power, then comes back, then loses power again etc.
Check union on front or nose of pump to ensure tightness. Check drain plugs to ensure tightness.
Air lock
Bleed off air at air relief valve on pump.
Jets won't come on
Probable Cause #1
Action
Probable Cause #2
Action
Pump not primed.
Refer to the section of this manual on pump priming.
Gates Valves closed.
Check to see if gate valves are in the correct position. Check to see that pump is purged in.
29
