O s s a r y o f T e r m s | Dynasty Spas Elite System D-3000

G l o s s a r y o f T e r m s

Check Valve Control Panel

Control Box

Drain

Filter

Footwell

G.F.C.I. Breaker

Gate Valves

Heater

Hose Bib

Jets

Ozone

The air blower supplies air to the jets creating a hydro massage action

A back up system for the check valve, prevents water from entering air blower

Mounted on the lip of the spa or at the equipment shroud, to induce air to the jets

The redwood or Dynalast foam that surrounds the spa, also called a skirt.

Prevents water back flow to blower.

Mounted on the lip of the spa. The digital panel that controls the spas functions.

Basically the brain of the spa. Power is distributed to all functions of the spa, pumps, blower, ozonator, flow switch heat, etc.

The fitting set into the footwell that drains water from the spa.

The filter cleans the spa and removes particles and debris and protects the equipment from foreign substances.

The bottom of a spa where you place your feet. Dynasty is known for it's larger footwells and comfortable seating.

The electronic switch installed in the power box of your house to give power to the spa. This is a non-user serviceable part.

T-handled valves located at the inlets and outlets of the equipment. The gate valve blocks or opens the water line by the equipment.

The thermostatically controlled heater raises the temperature of the water to the desired degree.

This is located under the control box in the equipment area.

Used in the draining of the spa, looks like an outdoor faucet and fits a standard garden hose.

The fittings on your spa that direct the flow of water for massaging action.

A water purification supplement method using Ozone gas. Gas is made by an Ozone Generator unit that can reduce you sanitizer needs by up to 25%.