Dynasty Spas Premier System D-2000 owner manual Low water flow, Spa is leaking, Motor does not run

T r o u b l e S h o o t i n g G u i d e ( c o n t . )

Low water flow

Probable Cause #1 Action

Probable Cause #2 Action

Probable Cause #3 Action

Spa is leaking

Probable Cause #1 Action

Dirty Filter

Remove filter cartridge and clean.

Closed gate valves or blocked lines.

Open all gate valves.

Low voltage or incorrect voltage

Have a Licensed Electrician check the line voltage

Loose connection.

Hand tighten all disconnects and fittings. Check joints and unions

Motor does not run

Probable Cause #1

Action

Probable Cause #2

Action

Probable Cause #3

Action

No power to motor.

Check power switches and circuit breakers. Check motor plug where plugged into control panel.

Pump jammed from foreign matter in impeller. Call dealer for recommended action.

Motor overheats during hot days while filtering. Re-program your controls to cycle during the coolest parts of the day and on shorter cycles. (see programming instructions)

Motor runs hot

Probable Cause #1 Action

Probable Cause #2 Action

Pump ran dry.

Call dealer for recommended action.

Restricted suction lines

Make sure all valves are open/clear suction of debris.

Note: These motors will feel hot to the touch. This is normal. The Overheat sensor will turn the motor off if there is an overload or high temperature problem.

30