22 Adjusting the pictureDX-24LD230A12
•Overscan—This feature extends part of the
display past the visible area of the screen. The
resulting picture will “zoom in” on the image
center.
•Color Temperature—Selects the color
temperature. You can select Cool (to enhance
the blues), Normal, or Warm (to enhance the
reds).
•Noise Reduction—Selects the noise
reduction mode to reduce picture noise
(snow). You can select Low, Middle, High, or
Off.
•Adaptive Contrast—Automatically adjusts
picture detail and brightness. You can select
On or Off.
•DCR—Enhances the contrast ratio between
light and dark areas of the picture. You can
select On or Off.
•Reset Picture Settings—Resets all picture
settings to factory default.
4Press EXIT to close the menu.

Setting power on vivid mode

If you select Retail Mode from the Setup Wizard to use
your TV/DVD combo for in-store display, you can set vivid
mode as your power on default, regardless of the picture
mode you select when turning off the TV/DVD combo.
To set power on vivid mode:
1Press MENU. The on-screen menu opens with the
Picture menu displayed.
2Press or to highlight Settings. The Settings
menu opens. Press or ENTER/ to access the
menu.
3Press or to highlight Menu Settings, then press
ENTER/.
4Press or to highlight Power On In Vivid Mode,
then press or to select On.
5Press EXIT to close the menu.

Adjusting the computer image

To adjust the computer image:
1Make sure that your TV/DVD combo is in VGA mode.
For more information, see “Selecting the video input
source” on page17.
2Press MENU. The on-screen menu opens with the
Picture menu displayed.
3Press or to highlight Settings. The Settings
menu opens. Press or ENTER/ to access the
menu.
4Press or to highlight VGA Settings, then press
ENTER/.
5The VGA Settings sub-menu opens. Press or to
highlight an option, then press or to adjust the
option.
You ca n s ele ct:
•Auto Adjust—Automatically adjusts the image
settings such as position and phase.
•H. Position—Moves the image right or left.
•V. Position—Moves the image up or down.
•Clock—Adjusts the sample frequency.
•Phase—Adjusts the focus of stable images.
6Press EXIT to close the menu.
Note
If you select Home Mode from the Setup Wizard, you
cannot set power on vivid mode.
Picture Audio Settings Channel
Select Move Return
English
0
Language
Transparency
Power On In Vivid Mode On
Note
If you select Off, the power on picture mode depends
on your last selection.
Open Source Notice
Reset to Default
DX-24LD230A12.book Page 22 Tuesday, August 16, 2011 2:58 PM