4Installing the stand or wall-mount bracketDX-24LD230A12
Installing the stand or wall-mount bracket

Installing the stand

To install the stand:
1Carefully place your TV/DVD combo screen
face-down on a cushioned, clean surface to protect
the screen from damage and scratches.
2Align the screw holes on the stand with the holes on
the bottom edge of the TV/DVD combo.
3Secure the stand to the TV/DVD combo with the two
screws (provided).

Installing a wall-mount bracket

To attach your TV/DVD combo to a wall-mount bracket:
1Carefully place your TV/DVD combo screen
face-down on a cushioned, clean surface to protect
the screen from damage and scratches.
2Remove the two screws that secure the stand to the
TV/DVD combo, then remove the stand.
3Attach the wall-mount bracket to your TV/DVD
combo using the mounting holes on the back of
your TV/DVD combo. See the instructions that came
with the wall-mount bracket for information about
how to correctly hang your TV/DVD combo.
Notes
If you plan to wall-mount your TV/DVD combo,
do not install the stand.
Store the stand and stand screws in case you
decide to use the stand in the future.
Warning
This apparatus is intended to be supported by a UL
Listed wall mount bracket.
Note
The length of the wall-mount screws vary depen ding
on the wall-mount bracket you purchased. See the
instructions that came with the wall-mount bracket
for screw lengths.
7.87 in. (200 mm)
3.94 in. (100 mm)
Wall mount br acket s
DX-24LD230A12.book Page 4 Tuesday, August 16, 2011 2:58 PM