10 Making connectionsDX-24LD230A12

Using composite video cable (good)

To connect a cable or satellite box using composite
video:
1Turn off your TV/DVD combo and all connected
equipment.
2Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3Connect an A/V cable (not provided) to the VIDEO
IN/VIDEO 1, and L, R jacks on the back of your
TV/DVD combo and to the composite video and
audio out jacks on the cable or satellite box.
4Turn on your TV/DVD combo, then turn on the cable
or satellite box.
5Go through the setup wizard described on page16.
6To watch TV, press INPUT to open the INPUT SOURCE
list, then press INPUT repeatedly, or press or to
select A/V, then press ENTER/.

Using coaxial cable (good)

To connect a cable or satellite box using coaxial cable:
1Turn off your TV/DVD combo and all connected
equipment.
2Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3Connect a coaxial cable (not provided) to the
ANT/CABLE IN jack on the back of your TV/DVD
combo and to the coaxial out jack on the cable or
satellite box.
4Turn on your TV/DVD combo, then turn on the c able
or satellite box.
5Go through the setup wizard described on page16.
P
B
P
R
Back of TV/DVD combo
Cable or satellite box
A/V cable
Cables are often
color-coded to match
color-coded jacks.
Notes
Use a coaxial cable to eliminate interference and
noise from radio waves.
Do not bundle the coaxial cable with the power
cord or other cables.
P
B
P
R
Cable or satellite box
Back of TV/DVD combo
Coaxial cable
DX-24LD230A12.book Page 10 Tuesday, August 16, 2011 2:58 PM