Making connections 9
DX-24LD230A12
4Turn on your TV/DVD combo, then turn on the cable
or satellite box.
5Go through the setup wizard described on page16.
6To wat ch T V, p re ss INPUT to open the INPUT SOURCE
list, then press INPUT repeatedly, or press or to
select HDMI 1 or HDMI 2, then press ENTER/.
Using DVI (same as HDMI but requires an audio
connection)
To connect a cable or satellite box using DVI:
1Turn off your TV/DVD combo and all connected
equipment.
2Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3Connect an HDMI-DVI adapter (not provided) to one
end of an HDMI cable (not provided), then connect it
to the DVI OUT jack on the cable or satellite box.
4Connect the other end of the HDMI cable to the
HDMI1 jack on the back of your TV/DVD combo.
5Connect a 3.5 mm audio cable (not provided) to the
PC/DVI AUDIO IN jack on the back of your TV/DVD
combo and to the AUDIO OUT jacks on the cable or
satellite box.
6Turn on your TV/DVD combo, then turn on the cable
or satellite box.
7Go through the setup wizard described on page16.
8To wat ch T V, p re ss INPUT to open the INPUT SOURCE
list, then press INPUT repeatedly, or press or to
select HDMI 1, then press ENTER/.
Using component video cable (better)
To connect a cable or satellite box using component
video:
1Turn off your TV/DVD combo and all connected
equipment.
2Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3Connect a component video cable (provided) to the
COMPONENT IN/Y, PB, PR jacks on the back of your
TV/DVD combo and to the component video out
jacks on the cable or satellite box.
4Connect an audio cable (provided) to the L, R audio
jacks on the back of your TV/DVD combo and to the
audio out jacks on the cable or satellite TV box.
5Turn on your TV/DVD comb o, then turn on the cable
or satellite box.
6Go through the setup wizard described on page16.
7To wat ch T V, p res s INPUT to open the INPUT SOURCE
list, then press INPUT repeatedly, or press or to
select Component, then press ENTER/.
Notes
An HDMI cable carries both audio and video. You do
not need to use any audio cables.
Note
A DVI device can only be connected to the HDMI1
jack on the back of your TV/DVD combo. If you
connect a DVI device to the HDMI2 jack, you will not
hear sound.
P
B
P
R
HDMI cable with
HDMI-DVI adapter
3.5 mm audio cable
Cable or satellite box
Back of TV/DVD combo
P
B
P
R
Back of TV/DVD combo
Component video cable
Audio cable
Cable or satellite box
DX-24LD230A12.book Page 9 Tuesday, August 16, 2011 2:58 PM