Dynex DX-24LD230A12 manual 26

26 Changing channel settingsDX-24LD230A12
Viewing a favorite channel
To view a favorite channel:
1Press FAV. The Favori tes channel list opens.
2Press  or  to highlight a channel, then press
ENTER/ to tune to the channel.
Adding or changing a channel label
If a channel is not already labeled, you can label the
channel to make it easier to identify. You can also relabel a
channel that is already labeled.
To add or change a channel label:
1Press MENU. The on-screen menu opens with the
Picture menu displayed.
2Press  or  to highlight Channel. The Channel
menu opens. Press  or ENTER/ to access the
menu.
3Press  or  to highlight Channel Labels, then
press ENTER/.
4Press  or  to select the channel you want to label,
then press  or ENTER/.
5Press ENTER/ again to open the on-screen
keyboard. Press , , , or  to highlight a
character, then press ENTER/ to add the character
to the label. Repeat this step to add more characters.
• Highlight Ca ps Lock, then press ENTER/ to
toggle the letter case from small to capital letters.
• Highlight , then press ENTER/ to delete a
character.
• Highlight Space, then press ENTER/ to insert
a space.
6When the label you want has been entered,
highlight Enter, then press ENTER/ to assign the
label to the channel.
7Press EXIT to close the menu.
Checking the digital signal strength
You can check the digital signal strength to determine if
you need to adjust your antenna or digital cable input.
The higher the signal strength, the less likely you are to
experience picture degradation.
To check the digital signal strength:
1Press MENU. The on-screen menu opens with the
Picture menu displayed.
DX-24LD230A12.book Page 26 Tuesday, August 16, 2011 2:58 PM