Dynex DX-LCD19 Setting up your TV, Selecting a location

12			Setting up your TV
	No.	Button	Description
	3	PICTURE	Press to select the picture mode.
	4	Numbers	Press to enter channel numbers.
	5		Press to select digital channels. For example, press 3,
			press this button, then press 1 to select digital channel
			3.1.
	6		Press to make selections or change options in the OSD.
	7	ENTER	Press to confirm a selection in the OSD or to return to a
			previous OSD menu.
	8	VOL+ and VOL–	Press to increase or decrease the volume.
	9	CCD	Press to select a closed caption mode.
	10	MTS/SAP	Press to select the sound mode. You can select Mono,
			Stereo, or SAP (second audio program).
	11	Power indicator	Lights when you press a button.
	12	INPUT	Press to select the video mode. You can select TV, Video,
			S-Video,Component, HDMI, or VGA.
	13	ZOOM	Press to select the aspect ratio. You can select Auto,
			Normal, Letterbox, or Panorama.
	14	AUDIO	Press to select the sound mode. You can select Rock,
			Pop, Live, Dance, Techno, Classic, or Soft.
	15	GUIDE	For ATSC tuners, press to display an electronic program
			guide (EPG).
	16	DISPLAY	Press to show video source.
	17	EXIT	Press to close the on-screen display (OSD).
	18	MENU	Press to open the on-screen display (OSD).
	19	RECALL	Press to go to the previously viewed channel.
	20	CH+ and CH–	Press to go to the next higher or lower channel.
	21	TIME	Press to display the current time.
	22	SLEEP	Press to set the sleep timer.

Setting up your TV

Selecting a location

•Place your TV on an open table or bench in a location where light does not shine directly on the screen.

•Make sure that your TV is far enough from walls to allow for correct ventilation. Inadequate ventilation may cause overheating, which may damage your TV.

•For information about mounting your TV on a wall, contact Dynex.