22

Using your TV

Memorizing channels

When you first set up your TV or if you move your TV to a different geographical location, you should scan for (memorize) channels. Your TV searches for all channels in your area that have a signal, then stores the channel information in memory. When you press CH+ or CH– to change channels, your TV skips the channel numbers that do not have signals.

To memorize channels:

1Make sure that you have selected the TV signal source. For more information, see “Selecting the TV signal source” on page 21.

2Press MENU. The on-screen display (OSD) opens.

3Press or to highlight TV, then press to enter the TV menu.

4Press or to highlight Channel Scan, then press to start the scan.

Deleting channels from memory

After you scan for channels, you can delete a channel from memory if you want to skip the channel when your press CH+ or CH–. You can still select the skipped channel using the number buttons.

To delete a channel from memory:

1Select the channel you want to delete.

2 Press MENU. The OSD opens.

3 Press or to highlight TV, then press to enter the TV menu.

4Press or to highlight Channel Skip, then press to delete the channel from memory.

Changing channels

To change channels:

•Press CH+ or CH– to go to the next higher or lower channel.

•Or, press the number buttons to select a channel. For example, to select channel 120, press 1, then 2, then 0.

•Or, press RECALL to go to the last viewed channel.

Selecting digital sub-channels

A main digital channel may have a sub-channel.

To select a digital sub-channel:

•Press the number buttons for the main channel, press , then press the number button for the sub-channel. For example, to select channel 3.1, press 3, press , then press 1.

Adjusting the volume

To adjust the volume:

•Press VOL+ or VOL– to increase or decrease the volume.

•Press Mute to turn off the sound. Press Mute again to turn the sound back on.