2-5-7 GPS Alert Options (ALERT)

The GPS alert is usually set to ON (on) so that if the GPS navigation receiver is disconnected,

the alarm sounds.

GPS/DATA

LLDISPLY COG/SOG

>GPS ALERT

GPS ALERT >ON

OFF

1.Select GPS/DATA, then SETTING.

2.Select GPS ALERT.

3.Select ON (on) or OFF (off ) as desired.

2-6 GPS Simulator (SIMULATOR)

The GPS Simulator is set to OFF whenever the radio is turned ON or whenever real GPS data is available through the COM port. However, if you want to test it, turn it on.

MENU SELECT DSC SETUP RADIO SETUP >GPS SIM

1.Select GPS SIM, then select ON (on) or OFF (off ) as desired.

Whenever the GPS Simulator is turned ON (on), simulated Speed Over Ground (SOG), Course Over Ground (COG), and LL position appear on the screen. This data is updated automatically during the simulation.

It is not possible to send a DSC transmission when in Simulator mode.

2-7 Reset to Factory Defaults (RESET)

Use this to return every setting to the factory defaults except all MMSI settings and the entries in your buddy list.

MENU SELECT RADIO SETUP GPS SIM >RESET

RESET RADIO ARE YOU SURE >YES

NO

1.Select RESET. The radio asks for confirmation.

2.Select YES to reset the radio and return to the menu.

EAGLE - EVR-150 Installation and Operation Instructions

25

Page 25
Image 25
Eagle Electronics EVR-150 manual GPS Alert Options Alert, GPS Simulator Simulator, Reset to Factory Defaults Reset