Checklist

The following items should be supplied in the box. Check before starting the installation and contact your dealer if an item is missing.

NOTE: An antenna is NOT provided. Consult your Eagle dealer for advice if necessary.

1.Mounting gimbal for the VHF radio

2.Power supply cable with inbuilt 7 Amp fuse

3.External speaker connection cable with white (+) wire and black (-) wire

4.GPS/COM connection cable

5.Two mounting knobs

6.Microphone bulkhead mount

7.Four self-tapping screws for the mounting gimbal

8.Four flat screws for the mounting gimbal

9.Four spring washers for the mounting gimbal

10.Four plain washers for the mounting gimbal

11.Four nuts for the mounting gimbal

12.Two self-tapping screws for the microphone bulkhead mount

13.Two flat screws for the microphone

bulkhead mount

14.Two spring washers for the microphone bulkhead mount

15.Two plain washers for the microphone bulkhead mount

16.Two nuts for the microphone bulkhead mount

17.Two flush-mount brackets for recessed installation

18.Two M5x32 screws for recessedinstallation

19.Two M5x10 screws for recessed installation

20.Two plastic stoppers for the recessed installation (not pictured)

21.Installation template (not pictured)

22.One 7 Amp spare fuse (not pictured) in case of accidental reverse of battery polarity

23.Base unit and microphone (not pictured)

1

2

3

4

5

6

18 & 19

17

7

8

9

10

11

12

13

14

15

16

6

EAGLE - EVR-150 Installation and Operation Instructions

Page 6
Image 6
Eagle Electronics EVR-150 manual Checklist