AC Output with Nominal Input Power and Loads (Protected Equipment)
Voltage Regulation: ±3% load regulation. Total voltage regulation under any line, load, or battery condition to within
Input Voltage Range: At low voltages:
Overload Capability: 150% surge and 125% for 10 minutes.
Output Frequency: On line: 60 Hz or 50 Hz.
On inverter: 60 Hz or 50 Hz ±0.1 Hz. Output frequency tracks input line frequency up to limit, which is adjustable from ±0.1 Hz to ±5 Hz. FERRUPS switches to battery power if line frequency exceeds the selected limit.
Lightning and Surge Protection
Tested in accordance with ANSI/IEEE C62.41 Category A (6000 volt spike and 200 amp) and Category B (6000 volt spike and 3000 amp) test, and ANSI/IEEE C62.45 test procedures, and per
Isolation and Noise Rejection
Isolation, Including Output
FERRUPS provides a true separately derived power source as defined by National Electrical Code Article
RF Noise Isolation: Common Mode: £ 120 dB. Differential Mode: ³ 60 dB.
Environment
Operating Temperature: Operating: 0° to 40° Celsius (32° to 104° F) and 95% relative humidity .
Storage Temperature: UPS with batteries inside:
Relative Humidity:
High Altitude Operation: The maximum operating ambient temperature drops 1° C per 300 m above sea level (2°F per 1000 ft. above sea level). Maximum elevation is 3000 m (10,000 ft.).
Ventilation:The air around the UPS must be clean,
23