Eaton Electrical quick start Pow-R-Command
1000 LCD Display Quick Start Guide, Introduction

Pow-R-Command
1000 — LCD Display

Quick Start Guide

Instruction Leaflet IL01412010E

Effective June 2006

Introduction

This is the Quick Start Guide for the PRC1000 LCD programming display. A worksheet of information that will be needed to complete this startup is found on Page 6 of this guide. Make sure you have all the listed information available before starting, either by filling in the worksheet, or from job documents.

Several conventions are used in this document. COURIER text indicates screen output or screen menu items. BOLD COURIER indicates user button presses.

Navigation through the LCD programming tool menus is via the four buttons to the right of the screen as shown above. They are BACK, UP, DOWN and SEL. Generally, BACK is used to cancel a selection or to move back up through the menu hierarchy. UP/DOWN are used to scroll through selections on a menu or to change values. SEL is used to choose a menu item or to enter a setting. Some menu screens will have an arrow symbol ( ) in the lower right corner. This indicates there are additional menu items for this screen. Use the UP/DOWN keys to scroll down to view the additional items.

Primary Handle

Control Handle

FIGURE 1. CONTROLLABLE CIRCUIT BREAKER

Eaton’s Cutler-Hammercontrollable circuit breakers have two handles, as shown in Figure 1. The larger black handle is referred to as the primary handle. The primary handle can be turned to the on or off positions by manual control. The smaller green handle is referred to as the control handle. The control handle can be moved to the off or on position by electronic control or to the on position by manual override.