EAW Loudspeaker's owner manual Section, Rigging / Mounting / Suspension, H i p p i n g D a m a g e

Section 2 Unpacking

2 . 1 S h i p p i n g D a m a g e

You should have visually inspected the outside of the shipping carton and noted any damage on the shipping bill you signed. After unpacking, if you find concealed damage to the loudspeaker, save the packing materials for the carrier's inspection, notify the carrier immediately and file a shipping damage claim. Although EAW will help in any way possible, it is always the responsibility of the receiving party to file any shipping damage claim. The carrier will help prepare and file this claim.

2 . 2 R e t u r n i n g P r o d u c t t o E AW

If this loudspeaker must be returned to EAW, contact the EAW Service Department for a Return Authorization. Use the original shipping carton and packing materials. If the shipping carton is damaged, contact EAW for a new carton at a nominal cost. EAW will not be responsible for damage caused by inadequate packing.

All units returned must have a factory Return Authorization Number. Any units received without a Return Authorization Number assigned and written prominently on the outside of the carton will be refused.

Section 3 Overview

This loudspeaker is intended for professional use. The construction, components, and hardware have been designed to provide robust, reliable performance for its intended applications. Please ensure that you fully understand proper installation and operation before use.

You will need to perform the following general tasks to properly put the loudspeaker into service. Details concerning each task are provided in this manual.

1.Design and install a rigging system to support the loudspeaker in its intended location and aimed in the desired direction.

2.Connect the loudspeaker to a power amplifier(s) selected to provide the output needed for the loudspeaker in the application. In the case of powered loudspeakers provide an ac mains supply as specified for the particular loudspeaker.

3.Set-up and adjust system gain, signal processing, and limiting, as needed to maximize the loudspeaker's performance.

4.Provide training to operate the loudspeaker within its limits.

5.Provide regular inspection and maintenance to maintain the integrity of the installation and performance of the loudspeaker system.

Section 4 Rigging / Mounting / Suspension

CAUTION: The rigging information provided herein is not all-inclusive. Rather it is intended as a guide to the work scope involved and to some of the more important issues that must be considered.

1