(1) | (3) | (4) |
|
(5)
CHECKING THE NYLON LINE CUTTING ATTACHMENT
(1)Make sure each periphery of the 2 retaining pawls of housing spreads almost fully up to the outer periphery of the respective cover window.
(2)Check mount of cutting head on trimmer and tighten if it is loose.
(3)Check the cutter head for deflection or abnormal noise rotating it by hand.
Deflection or abnormal noise can cause abnormal vibration to occur or mount to trimmer to loosen during rotation which is dangerous.
(4)Inspect cover and tap knob for wear.
When slot appears on bottom of the tap knob or when slot appears on cover bottom close to outlet for Nylon line, replace them with new parts without fail.
(5)Check the cutting head for crack or chip.
Replace parts that show any crack or chip with new ones without fail.
21 |