5 |
Balance and Adjust Unit
1.Loosen harness clamp screw.
2.Put on harness and attach unit to harness.
3.Slide harness clamp (L) up or down until unit balances with head approximately
4.Tighten harness clamp screw.
5.Loosen upper
6.Tighten
NOTE
In case of Emergency, the trimmer/brushcutter can be released from the harness by pulling up on the
N
L
If you require assistance or have questions concerning the application, operation or maintenance of this product you may call the ECHO Consumer Product Support Department at
ECHO, INCORPORATED 400 OAKWOOD ROAD LAKE ZURICH, IL 60047 USA PHONE: