How to operate the receiver with an optional DSP/EQ unit or Digital Sound Processor connected

[FUNC] button

Button [4]

Calling the level memory

The stored speaker level is called.

1.Press the [FUNC] button.

2.Press button [3] for less than one second. The state shifts to the level memory mode.

3.Press any number button for one second. The stored speaker level is called.

4.Press the [FUNC] button.

The level memory mode will be canceled to return to the normal status.

Adjusting the center-level blend

This is a function to blend the sound of the center channel with that of the right and left front speakers when the Dolby pro-logic function is ON and this is a function of the Dolby standard for car audio equipment. This function is used to make adjustments for a music listener who is not directly facing the center speaker.

1.Press the [FUNC] button.

2.Press and hold button [3] for more than two seconds to shift to the setting mode.

3.Make adjustments by pressing button [5] or [6]. Button [5]: DOWN

Button [6]: UP

4.Press the [FUNC] button to return to the setting mode.

5.Press the [FUNC] button again to cancel the setting mode.

88