Edimax Technology BR-6104KP user manual Remote Management, Wan

2.1.3 Remote Management

The remote management function allows you to designate a host in the Internet the ability to configure the Broadband router from a remote site. Enter the designated host IP Address in the Host IP Address field.

Parameter	Description
	This is the IP address of the host in the Internet that will have management/configuration
	access to the Broadband router from a remote site. This means if you are at home and
	your home IP address has been designated the Remote Management host IP address
	for this router (located in your company office), then you are able to configure this router
	from your home. If the Host Address is left 0.0.0.0 this means anyone can access the
	router’s web-based configuration from a remote location, providing they know the
	password.
	Click the Enabled box to enable the Remote Management function.
Host Address	Note: When you want to access the web-based management from a remote site, you
	must enter the router’s WAN IP address (e.g. 10.0.0.1) into your web-browser followed
	by port number 8080, e.g. 10.0.0.1:8080 (see below). You’ll also need to know the
	password set in the Password Setting screen in order to access the router’s web-based
	management.
Port	The port number of remote management web interface.
Enabled	Select “Enabled” to enable the remote management function.

Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place)

2.2 WAN

Use the WAN Settings screen if you have already configured the Quick Setup Wizard section and you would like to change your Internet connection type. The WAN Settings screen allows you to specify the type of WAN port connect you want to establish with your ISP. The WAN settings offer the following selections for the router’s WAN port, Dynamic IP, PPPoE, PPTP, Static IP Address, L2TP, Telstra Big Pond, DNS and DDNS.

21