2.4.3 Special Applications
Some applications require multiple connections, such as Internet games, video conferencing, Internet telephony and others. In this section you can configure the router to support multiple connections for these types of applications.
| Parameter |
| Description |
| Enable Trigger Port |
| Enable the Special Application function. |
|
|
|
|
| Trigger Port |
| This is the out going (Outbound) range of port numbers for this particular application |
|
|
|
|
| Trigger Type |
| Select whether the outbound port protocol is “TCP”, “UDP” or both. |
|
|
|
|
|
|
| Enter the |
|
| 2400, 47624) | |
| Public Port |
| Note: Individual port numbers are separated by a comma |
|
|
| (e.g. 47624, 5775, 6541 etc.). To input a port range use a “dash” to separate the two port |
|
|
| number range (e.g. |
|
|
|
|
| Public Type |
| Select the Inbound port protocol type: “TCP”, “UDP” or both |
|
|
|
|
| Comment |
| The description of this setting. |
|
|
|
|
|
|
| This section lists the more popular applications that require multiple connections. Select |
| Popular applications |
| an application from the Popular Applications selection. Once you have selected an |
|
| application, click the Add button. This will automatically copy the Port Trigger information | |
|
|
| |
|
|
| required for this popular application in into the input fields. |
|
|
|
|
|
|
| Fill in the "Trigger Port", "Trigger Type”, “Public Port”, "Public Type", "Public Port" and |
|
|
| "Comment" of the setting to be added and then click "Add". Then this Special Application |
| Add Special Application |
| setting will be added into the "Current |
|
| before adding it and want to retype again, just click "Clear" and the fields will be cleared. | |
|
|
| |
|
|
| If you want to add a popular application, select one “Popular Application” and then click |
|
|
| “Add”. |
|
|
|
|
| Remove Special |
| If you want to remove some Special Application settings from the " Current |
|
| Table", select the Special Application settings you want to remove in the table and then | |
| Application |
| click "Delete Selected". If you want remove all Special Appliacation settings from the |
|
|
| table, just click "Delete All" button. Click "Reset" will clear your current selections. |
|
|
|
|
Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place)
30
