2.2.8 DDNS
DDNS allows you to map the static domain name to a dynamic IP address. You must get an account, password and your static domain name from the DDNS service providers. This router supports DynDNS and TZO.
Parameter | Default |
Enable/Disable | Disable |
|
|
Provider |
|
|
|
Domain name |
|
|
|
| |
|
|
Password/Key |
|
|
|
Description
Enable/Disable the DDNS function of this router
Select a DDNS service provider
Your static domain name that use DDNS
The account that your DDNS service provider assigned to you
The password you set for the DDNS service account above
Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place)
2.3 LAN
The LAN Port screen below allows you to specify a private IP address for your router’s LAN ports as well as a subnet mask for your LAN segment.
Parameter | Default |
LAN IP | 192.168.2.1 |
IP address |
|
IP Subnet Mask | 255.255.255.0 |
|
|
Description
This is the router’s LAN port IP address (Your LAN clients default gateway IP address)
Specify a Subnet Mask for your LAN segment
25
