45
Parameters Default Description
Mode It allows you to set the AP to AP, Station,
Bridge or WDS mode.
Band It allows you to set the AP fix at 802.11b or
802.11g mode. You also can select B+G
mode to allow the AP select 802.11b and
802.11g connection automatically.
ESSID default This is the name of the wireless LAN. All the
devices in the same wireless LAN should
have the same ESSID.
Channel Number 11 The channel used by the wireless LAN. All
devices in the same wireless LAN should use
the same channel.
Associated Clients Click “Show Active Clients” button, then an
“Active Wireless Client Table” will pop up. You
can see the status of all active wireless stations
that are connecting to the access point.
WLAN MAC This is the MAC address used by the Wireless
interface of this AP when it is in the station
modes.