Step 9
Repeat step 5 to 7 for the remainder of the computers.
Step 10
Attach the power supply to the KVM unit and plug the other end into an electrical receptacle. Now you will see the LED for Port 1 light up, and you will hear a beep. Switch on your monitor.
NOTE:
Please be remind to plug in power adapter. Although the PCs connected to KVM Switch are able to support enough power to the stand alone switch, KVM Switch still needs a power adapter for daisy chain more banks. If you forget to plug in power adapter on the status of daisy chain, it may cause the unexpected status occurred.
Usage
The power on state of 8/16 port KVM switch:
When you power on KVM switch, it will ask you the password, the default password value is eight zero
Note: Before you are not familiar with the operation of OSD menu, please don’t change the password – i.e. keep default eight zero (00000000) value. Otherwise, if you have set the password and unfortunately forget the password, you need send it back to your distributor for maintaining the password.
The Push Buttons |
| : |
|
|
|
| |||
Pressing the button cyclically through all the ports. |
|
| |||||||
8 port KVM Switch |
|
|
|
|
|
| |||
|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| |||||||||
|
|
|
|
|
|
|
|
|
|
7-Segment LED Indication 
:
You can press the button in order like
When you select one of eight PC ports and this PC is shut down or this PC port is disconnected to the PC, the selected port LED will flash. When you select one of eight PCs ports and this PC is powered on, the selected port LED is lit.
16 port KVM Switch
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
16 | 15 | 14 | 13 | 12 | 11 | 10 | 9 |
