SETUP
JUNCTION BOX MOUNTING
1.Secure the junction box (Figure 8) to the adapter plate using the supplied bolts (2), lock washer (2), and flat washer (2). Tighten mounting bolts securely.
LAMP
ADAPTER
PLATE
BOLT
(2)
POLE
LOCK
WASHER (2)
FLAT
WASHER
(2)
JUNCTION BOX
LAMP MOUNTING
1.Place the GB4000 lamp fixture onto the lamp adapter plate pole as shown in Figure 9.
2.Insert locking pin into hole opening on pole, then insert cotter pin to lock pin in place.
BALLOON POWER CABLE
1.Connect the balloon power cable (Figure 9) to the 10- pin receptacle on the junction box.
Figure 8. Junction Box Mounting
LOCKING PIN
BALLOON FIXTURE
2 FT. (10 PIN) |
|
BALLOON | COTTER PIN |
POWER CABLE | |
| PLATE ADAPTER |
| POLE |
JUNCTION BOX
Figure 9. Balloon Power Cable Connection
PAGE 22
