Multiquip manual GB4000 Components

COMPONENTS

1

2	3
	5

4

6

7

Figure 3. GB4000 Components

1.Lamp Fixture — Made of heat resistant polyester balloon and four 1000-watt metal halide lamps.

2.Locking Pin — Locks the lamp fixture in place when attached to the pole on the bracket.

3.Balloon Power Cable — Provides AC power to the lamps, fan and balloon inflation circuit.

4.Adapter Plate — Attaches to the T-Bar and mast interface of the light tower to allow the GB4000 to be installed.

NOTICE

This adapter plate (item 4) fits most conventional light tower masts.

5.Junction Box — Holds the electrical connection and cables to connect the lamp fixture to the T-Bar and to the power cable.

6.Support Bracket — Attaches to T-Bar to support adapter plate (hardware not shown).

7.Connector Cap — Provides protection to the receptacle on the junction box when not in use.

PAGE 18 —GB4000 BALLOON LIGHT• OPERATION AND PARTS MANUAL — REV. #1 (02/25/14)