Multiquip GB4000 manual Lamp Cable Connections

LAMP CABLE CONNECTIONS

On the T-Bar (Figure 10) there are four power receptacles J1, J2, J3 and J4. These receptacles provide AC power to the existing rectangular lamps. When the GB4000 lamp assembly is employed, these receptacles are used to connect the GB4000. Refer to Figure 10.

GB4000

JUNCTION BOX

T-BAR

NOTE: CABLE FROM LAMP 1 MUST BE CONNECTED FOR OTHER LAMPS TO OPERATE AND FOR BALLOON TO INFLATE.

1 2 3 4

LT12 LAMP	MLT LAMP
CIRCUIT BREAKERS	CIRCUIT BREAKERS

ON ON ON ON

CB1 CB2

ON ON

CB1 CB2 CB3 CB4

Figure 10. Lighting Configuration

GB4000 BALLOON LIGHT• OPERATION AND PARTS MANUAL — REV. #1 (02/25/14) — PAGE 23