Ei Electronics Ei261DENRC, Ei261ENRC manual Alarm Positioning, Unsuitable Locations

Models: Ei261ENRC Ei261DENRC

1 34
Download 34 pages 46.08 Kb
Page 10
Image 10

B16132-R0-261ENRC-UC-ENG 7/11/07 11:52 AM Page 10

3.ALARM POSITIONING

3.1IDEALLY A CARBON MONOXIDE (CO) ALARM SHOULD BE INSTALLED IN:

-Every room containing a fuel burning appliance

-Remote rooms where occupants spend a considerable amount of time

-Every bedroom

However if the number of CO Alarms is limited, the following points should be considered when deciding where best to fit the alarm(s)

-If there is an appliance in a room where people sleep, place a CO Alarm in this room

-Locate a CO Alarm in a room containing a flueless or open-flued appliance

-Locate a CO Alarm in a room where the occupant(s) spend most of their time (e.g. living room)

-In a bedsit, the CO Alarm should be placed as far away from the cooking appliance as possible, but near to where the occupant sleeps

-If the appliance is in a room not normally used (such as a boiler room) the CO Alarm should be placed just outside the room so that the alarm will be heard more easily

3.2 UNSUITABLE LOCATIONS

Do not place the CO Alarm in any of the following areas

-In the immediate vicinity of a cooking appliance

-Outside the building

10

Page 10
Image 10
Ei Electronics Ei261DENRC Alarm Positioning, Ideally a Carbon Monoxide CO Alarm should be Installed, Unsuitable Locations