B16132-R0-261ENRC-UC-ENG 7/11/07 11:52 AM Page 12

-If there is a partition in the room, the CO Alarm should be located on the same side of the partition as the potential source

-In rooms with sloped ceilings, the CO Alarm should be located at the high side of the room (see Figure 3)

3.4IF LOCATING THE CO ALARM IN A BEDROOM OR IN ROOMS REMOTE FROM A FUEL BURNING APPLIANCE (see Figure 3)

- Mount the CO alarm relatively close to the breathing zone of the occupants

Whatever position is chosen make sure it is possible to view the three light indicators, when in the vicinity of the alarm.

12

Page 12
Image 12
Ei Electronics Ei261DENRC, Ei261ENRC manual B16132-R0-261ENRC-UC-ENG 7/11/07 1152 AM